Beurer IL 60 Instrucciones De Uso página 12

Read these instructions for use carefully. Follow the warnings
and safety notes. Keep these instructions for use for future ref-
erence. Make the instructions for use accessible to other users.
If the device is passed on, provide the instructions for use to the
next user as well.
CONTENTS
1. INCLUDED IN DELIVERY ...............................12
2. SIGNS AND SYMBOLS ..................................12
3. INTENDED USE ..............................................13
4. WARNINGS AND SAFETY NOTES.................14
5. DEVICE DESCRIPTION ..................................15
6. INITIAL USE ....................................................15
6.1 Prior to initial use .....................................15
6.2 Unpacking and setup ..............................15
6.3 Preparation for treatment ........................15
6.4 Treatment duration ..................................15
1. INCLUDED IN DELIVERY
Check that the exterior of the cardboard delivery packaging is
intact and make sure that all contents are present. Before use,
ensure that there is no visible damage to the device or included
components and that all packaging material has been removed.
If you have any doubts, do not use the device and contact your
retailer or the specified Customer Services address.
• 1 infrared heat lamp
• 1 set of protective eyewear
• 1 copy of these instructions for use
2. SIGNS AND SYMBOLS
The following symbols are used on the device, in these instruc-
tions for use, on the packaging, and on the type plate for the de-
vice:
 WARNING
Indicates a potentially impending danger. If it is not avoided,
there is a risk of death or serious injury.
NOTICE
Indicates a potentially harmful situation. If it is not avoided, the
device or something in its vicinity may be damaged.
CE labelling
This product satisfies the requirements of the
applicable European and national directives.
ENGLISH
7. USAGE ...........................................................16
7.1 Starting treatment....................................16
7.2 After treatment ........................................16
8. CLEANING AND MAINTENANCE...................16
8.1 Cleaning ..................................................16
8.2 Replacing the infrared lamp ....................16
9. WEAR PARTS AND REPLACEMENT PARTS .16
10. WHAT IF THERE ARE PROBLEMS? ............17
11. DISPOSAL ....................................................17
12. TECHNICAL SPECIFICATIONS ....................17
13. GUARANTEE ................................................18
Observe the instruction
Read the instructions before starting work and/or
operating devices or machines
Unique device identifier (UDI)
UDI
Identifier for unique product identification
Protection class II device
The device is double-insulated and, therefore, meets
protection class 2
Separate the packaging elements and dispose of
them in accordance with local regulations
Marking to identify the packaging material.
A = material abbreviation,
B
B = material number:
1–7 = plastics,
A
20–22 = paper and cardboard
Separate the product and packaging elements and
dispose of them in accordance with local regulations.
Disposal in accordance with the Waste Electrical and
Electronic Equipment EC Directive (WEEE)
SN
Serial number
Batch designation
12