Descargar Imprimir esta página

Beurer IL 60 Instrucciones De Uso página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
Warning and safety notes on protective eye-
wear
 WARNING
• Keep packaging material away from children. There is a risk
of suffocation.
• Children must not play with the protective eyewear.
• Before using the protective eyewear, check it for signs of ex-
ternal damage (e.g. cracks or holes). If the protective eyewear
is damaged, you must NOT continue using it.
• When wearing the protective eyewear, people with sensitive
skin may have an allergic reaction to the materials of the eye-
wear that may come into contact with the skin.
• Make sure that the protective eyewear does not come into
contact with grease, oils, or alcohol (e.g. cleaning products
or facial toners).
• Use the protective eyewear only in quiet environments, so
that you are not disturbed during use.
Repairs
 WARNING
• Risk of electric shock! You may only open the device to
change the infrared lamp. Unplug the mains cable from the
socket before replacing the infrared lamp! Never try to repair
the device yourself, as faultless functionality can no longer be
guaranteed thereafter. Failure to comply with this instruction
will void the guarantee.
• For repairs, please contact Customer Services or an author-
ised retailer.
5. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
1
Housing with handles for adjusting the tilt angle
2
Glass pane
3
Time selection button
4
Remaining time display
5
ON/OFF switch
6
Device base
7
Infrared lamp
6. INITIAL USE
6.1 Prior to initial use
NOTICE
• Before using the device, remove all packaging material.
• Check the device for signs of wear and tear or damage. If
the device is damaged or you have any doubts, do not use it
and contact your retailer or Customer Services at the address
provided.
• The manufacturer is not liable for damage resulting from im-
proper or incorrect use.
• Protect the device from dust, dirt, sunshine and moisture.
6.2 Unpacking and setup
 WARNING
• The device should
not be laid flat or po-
sitioned at an angle.
• The minimum dis-
tance between com-
bustible objects and
the
infrared
lamp
must not be less than
1 metre.
• Ensure that the de-
vice is not placed on
flammable items such
as tablecloths or carpets.
• Do not bring items that are highly flammable or likely to melt
into the proximity of the device.
• Do not hang the device from the wall or the ceiling.
• Do not use the device outside.
• Protect the device from strong impacts to avoid the risk of
damaging the lamp. This also includes setting the device up
in a rough manner.
• Unwind the mains cable fully.
NOTICE
Avoid knocks to the device during use and during the cooling off
period, as these can lead to the infrared lamp being damaged.
1. Place the device on a stable, even surface.
2. Insert the mains plug into the socket. The full display lights
up briefly and then "--" is displayed. The infrared lamp is now
ready for operation.
6.3 Preparation for treatment
1. Position yourself in front of the device so that you can relax and
enjoy the treatment of the affected part of the body.
2. Align the device correctly by tilting the infrared lamp towards
the part of the body requiring treatment. The distance between
the body part and the infrared lamp is generally determined
on the basis of individual sensitivities to heat and the type of
treatment being performed.
3. Select the distance to the device such that the heat always
feels pleasant on the skin. If the heat feels too warm on your
skin, move away from the device.
4. Always use the supplied protective eyewear during usage.
The protective eyewear corresponds to the requirements of
EN 171:2002 and serves to protect the eyes.
 WARNING
Never look directly into the infrared light without protective eye-
wear.
Do not use the device continuously for longer than 15 minutes
as there is a risk of overheating! Allow the device to cool before
using it again.
6.4 Treatment duration
 WARNING
Risk of burning: Before switching on the device, remove metallic
objects from the area to be treated, such as belt buckles, necklac-
es, bras, jewellery, or piercings, as these can heat up significantly.
We recommend selecting a short radiation time at the start. Even
when the device is used correctly, some people may still experi-
15
Min. 1 m

Publicidad

loading