Daitsu DS-18UIAK Manual De Usuario página 41

Operation of wireless remote control
Notice: This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model dosen't have, if press the correspon-
ding button on the remote controller that the unit will keep the original running status.
Remote control
X-FAN
X-FAN button
● PressingX-FAN button in COOL or DRY
mode,the icon
indoor fan will continue operation for 10
minute in order to dry the indoor unit even
though you have turned off the unit. After
energization, X-FAN OFF is defaulted. X-
FAN is not available in AUTO, FAN or HEAT
mode.
Note: X-FAN is the alternative expression
of BLOW for the purpose of understanding.
TURBO
TURBO button
● In Cool or Heat mode, press this button
can turn on or turn off the Turbo function.
After turned on the Turbo function, its signal
will be displayed. When switching the mode
or changing fan speed, this function will be
canceled automatically.
Names and functions of wireless remote control
is displayed and the
+
+ button
●For presetting temperature increasing.
Press this button,can set up the tempe-
rature, when unit is on. Continuously
press and hold this button for more than
2 seconds, the corresponding contents
will be changed rapidly, until unpress
the button then send the information, ºC
(ºF) is displaying all along. In Auto mode,
the temp-erature can not be set up, but
operate this button can send the signal.
Centigrade setting range :16-30; Fahren-
heit scale setting range 61-86.
-
- button
● Presetting temperature can be decrea-
sed. Press this button, the temperature
can be set up, continuously press this
button and hold for two seconds, the re-
lative contents can quickly change, until
unhold this button and send the order
that the ºC (ºF) signal will be displayed
all the time. The temperature adjustment
is unavailable under the Auto mode, but
the order can be sent by if pressing this
button.
LIGHT
LIGHT button
● Press this button at unit On or Off
status, Light On and Light Off can be
set up. After powered on, Light On is
defaulted.
8