Daitsu DS-18UIAK Manual De Usuario página 43

Operation of wireless remote control
1. After powered on, press ON/OFF button, the unit will start to run. (Note: When it is
powered on, the guide louver of main unit will close automatically.)
2. Press MODE button, select desired running mode.
3. Pressing +or - button, to set the desired temperature. (It is unnecessary to set the
temp. at AUTO mode.)
4. Pressing FAN button, set fan speed, can select AUTO FAN, LOW, MID and HIGH.
5. Pressing button, to select the swing.
1. Press SLEEP button, to set sleep.
2. Press TIMER ON and TIMER OFF button, can set the scheduled timer on or timer off.
3. Press LIGHT button, to control the on and off of the displaying part of the unit.
(This function may be not available for some units).
4. Press TURBO button, can realize the ON and OFF of TURBO function.
★
About X-FAN function
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit
is stopped to avoid mould.
1. Having set X-FAN function on: After turning off the unit by pressing ON/OFF button indoor fan will
continue running for about 10 min at low speed. In this period, press X-FAN button to stop indoor fan
directly.
2. Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the complete unit
will be off directly.
★
About AUTO RUN
When AUTO RUN mode is selected, the setting temperature will not be displayed on the LCD, the unit
will be in accordance with the room temp. automatically to select the suitable running method and to
make ambient comfortable.
★
About turbo function
If start this function, the unit will run at super-high fan speed to cool or heat quickly so that the ambient
temp. approachs the preset temp. as soon as possible.
Guide for operation - general operation
Guide for operation - Optional operation
Introduction for special function
10