Daitsu DS-18UIAK Manual De Usuario página 42

Operation of wireless remote control
Notice: This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model dosen't have, if press the corresponding
button on the remote controller that the unit will keep the original running status.
Remote control
SWING UP AND DOWN BUTTON
● Press this button, to set up swing
angle, which circularly changes as below:
OFF
This is an universal use remote controller. If
remote controller sends the following three
kinds of status that the swing status of
main until will be:
When the guide louver start to swing up
and down, if turn off the Swing, the air
guide louver will stop at current position.
which indicates the guide louver swings
up and down between that all five
positions.
Names and functions of wireless remote control
TIMER ON
TIMER ON BUTTON
●Timer On setting: Signal "ON" will blink
and display, signal
numerical section will become the timer
on setting status. During 5 seconds blink,
by pressing + or - button to adjust the
time value of numerical section, every
press of that button, the value will be
increased or decreased 1 minute. Hold
pressing + or - button, 2 seconds later, it
quickly change, the way of change is:
During the initial 2.5 seconds, ten num-
bers change in the one place of minute,
then the one place is constant, ten num-
bers change in the tens place of minute
at 2.5 seconds speed and carry. During
5s blink, press the Timer On button, the
timer setting succeeds. The Timer On has
been set up, repress the timer On button,
the Timer On will be canceled. Before
setting the Timer, please adjust the Clock
to the current actual time.
TIMER OFF
TIMER OFF BUTTON
●Once press this key to enter into TIMER
OFF setup, in which case the TIMER OFF
icon will blink. The method of setting is
the same as for TIMER ON.
9
will conceal, the