Publicidad
Idiomas disponibles
Idiomas disponibles
Cook time
You can use the timer function to set a cook time for any
element. The element will turn off automatically
once the
set time has elapsed.
CAUTION
@
@
@
When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
of time, especially
at high heat settings.
Make sure the cooktop is turned off with the main
power switch after each use.
Setting the cook time
1. Select the desired element and power level.
2. Touch the Timer key twice. The indicator for the
desired element lights up. -._ and min appear, and ,._,_a"_"_
lights up on the Timer display.
o,,/ofr c_,,Loc_ _.
0
1
o
2
o
3
o
4
o
5 "-
ChildLock
,me,
3. Within the next 10 seconds, set the required time
using the number keys.
9.0
Chef
P_ograms
Sta_
=
o---z__
,-:--i
The timer begins to count down.
The element must be selected in order to display the
countdown
for the particular heating element.
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator n Laappears in
the element display, nn
LaLalights up for 10 seconds on the
Timer display. The indicators disappear
and the beep
stops.
Changing
cook time
Select the element and touch the Timer key twice. Set
the new cook time using the number keys 0 to 9.
Cancelling
cook time
Select the desired element and touch the Timer symbol
twice. The min, __ and -._ indicators
light up. Then select
0 from the number keys until nn
uu is displayed.
Timer function with AutoChef
TM
When you cook using AutoCheff M, the programmed
cook
time begins to count down once the selected element
reaches the set temperature.
Notes
@
@
You can set a cook time of up to 99 minutes.
To program a cook time of less than 10 minutes,
always select 0 first before you select the required
value.
@ After a power outage, the timer function will be
cancelled.
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically
turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the chapter "Basic settings".
Note: The cook time can be changed or cancelled for
any element:
Touch the Timer key several times until the O indicator
of the required element lights up. Adjust the cook time
with touch keys 1 to 9 or deactivate with 0.
Kitchen timer
The timer can be set for periods of up to 99 minutes. It is
independent
of the other settings. You can also use the
kitchen timer when the cooktop is turned off or locked.
This function does not automatically
switch off an
element.
Setting the kitchen timer
1. Touch the Timer key. nn
,._,._a appears in the timer display.
The __, min and L_ indicators
light up.
2. Set the required time using the number keys 0 to 9.
After a few seconds, the __ indicator goes out and the
programmed
time starts to count down.
Once the time has elapsed
At the end of the programmed
time, a beep will sound
and mm
u,.., will appear on the timer display. The L_ indicator
is on. The display turns off after 10 seconds.
Changing the time
Touch the Timer key. The __ and L_ indicators
light up.
Change the time using the number keys 0 to 9.
Clearing the time
Touch the Timer key. The __ and L_ indicators
light up.
Touch the 0 key until UU appears on the timer display.
The L_ indicator goes out.
16
Publicidad
