Publicidad
Idiomas disponibles
Idiomas disponibles
— Wire size is large enough for AC ampere rating of
charger as follows
100-120 Volt
Charger
Cord Length (feet)
25
50
100
220-240 Volt
Charger
Cord Length
(meters)
50
75
Recommended Extension Cord Length
SAVE THESE
INSTRUCTIONS
Functional
Description
A
B
C
Figure
1: Cordless Ratchet
A – Mini-Drill Attachment
B – Trigger
C – Battery Pack
A
B
Figure
2: Battery Pack
A – Terminal
B – Latch Button
ZCDRR2005CE Rev D
EN
EN
Wire Size (AWG)
18
18
18
Wire Size (mm)
0.75
1.0
Specifications
Bit Thread ..........................................1/4"-28 UNF
Motor Voltage ........................................14.4 VDC
Free Running Speed .....................6000 RPM MAX
Weight with Battery Pack ........... 1.4 lbs. (0.64 kg)
Length ......................................... 12" (304.8 mm)
Height .......................................... 3.3" (83.8 mm)
Width ............................................ 1.8" (45.7 mm)
Operating Temperature
............................... -4°F(-20°C) to 140°F(60°C)
Storage Temperature
............................... -4°F(-20°C) to 140°F(60°C)
Noise* (Tested in accordance with EN 62841-2-1,
Annex I)
Sound Pressure Level (A)
CDRR2005 ..............................................74.2 dB
CDRR200545 ..........................................TBD dB
CDRR2005360 ........................................TBD dB
Uncertainty, K ...........................................3.0 dB
Sound Power Level (A)
CDRR2005 ..............................................85.2 dB
CDRR200545 ..........................................TBD dB
CDRR2005360 ........................................TBD dB
Uncertainty, K ...........................................3.0 dB
Vibration* (Tested in accordance with ISO 28927)
Vibration Level
CDRR2005 ...........................................20.3 m/s
Uncertainty, K ........................................4.5 m/s
CDRR200545 ....................................... TBD m/s
Uncertainty, K ...................................... TBD m/s
CDRR2005360 ..................................... TBD m/s
Uncertainty, K ...................................... TBD m/s
*These declared values were obtained by
laboratory type testing with the stated standards
and are not adequate for use in risk assessments.
Values measured in individual work places may be
higher. Values and risk of harm experienced by an
individual user are unique and depend upon the
environment and manner in which the user works,
the work piece and the workstation design, as well
as upon the exposure time and the physical
condition of the user.
Snap-on disclaims liability for the consequences of
using the declared values, instead of values reflecting
the actual exposure determined in an individual risk
assessment in a work place situation over which we
have no control.
Symbology
SYMBOLOGY
REFER TO INSTRUCTION
MANUAL/BOOKLET
7
2
2
2
2
2
2
(07/21)
Publicidad
