Publicidad
Idiomas disponibles
Idiomas disponibles
WEAR EYE PROTECTION
WEAR HEARING PROTECTION
VIBRATION HAZARD
VOLTS
DIRECT CURRENT
n
xxx/min
NO LOAD SPEED
0
CE MARK
PROPERLY RECYCLE BATTERY
DO NOT THROW IN GARBAGE
BC
CALIFORNIA - TITLE 20
COMPLIANT
UKCA (UK CONFORMITY
ASSESSED) MARKING
Battery Pack
Specifications
DO NOT USE CTB6172
Type
CTB8174 ............................................ Lithium-Ion
Voltage
CTB8174 ................. 14.4/7.2 VDC (3.6 V x 4 cells)
Weight
CTB8174 ......................................... 0.6 lbs (.3 kg)
ZCDRR2005CE Rev D
EN
EN
Charge Time
CTB8174 .................................................. -70 min
Life
CTB8174 ............................................ 1000 cycles
Note: 1 cycle=1 charge and 1 discharge
Capacity
CTB8174 ...................................................2.5 A•H
Discharge Temperature Range
CTB8174 ................... -4°F(-20°C) to 140°F(60°C)
Battery Charger
Specifications
Input
CTC772A ..................................120 VAC, 50/60 Hz
CTC772A/CTCA772A/CTCEU772A/CTCJ772A ........
......................................... 220-240VAC, 50/60 Hz
CTCJ772A ................................ 100VAC, 50/60 Hz
Output
All Models .....................................................3.0 A
Weight
All Models ................................... 1.0 lbs (0.47 kg)
Charging Temperature Range
CTB8174 ...................... 32°F(0°C) to 113°F(45°C)
DO NOT BLOCK VENT OPENINGS!
Application
The Snap-on CDRR2005 Cordless Drill is a rugged drill
that is ideal for many confined automotive and industrial
applications.
It is designed and built to make fast work of light duty
drilling jobs.
Installing Bits
1. Use the enclosed flat wrench to hold the chuck on the
drill.
2. Install a bit or accessory with 1/4"-28 UNF threads.
3. Torque the bit or accessory to no greater than 10 in-lb
using the wrench included with the bit.
Variable Speed Trigger
This tool is equipped with a variable speed trigger which
allows precise output speed control.
Angle Head Lubrication
If the drill receives daily, steady use, the angle head
should be greased daily. Adjust the lubrication schedule
according to the usage. Using a Snap-on YA4190CAP
Grease Gun, or similar type grease gun, inject grease
through the fitting in the angle head Use a grease such as
Snap-on ME18A15 Ratchet Grease or an equivalent type.
8
(07/21)
Publicidad
