Korg KingKORG NEO Manual Del Usuario página 11

Rear panel
Cable hook
To prevent the power cord from being
accidentally pulled out of the DC12V jack,
fasten the cable around this hook.
Power switch
This turns the power on/off.
MIDI IN/OUT connectors
These connectors allow the KingKORG NEO
to exchange MIDI messages with an external
MIDI device.
USB B connector
This connector allows the KingKORG NEO
to exchange MIDI messages with your
computer.
Note regarding power (the Auto Power-O function)
This instrument is equipped with an auto power-off function.
The power will turn off automatically if a certain length of time elapses without any user input.
(With the factory se ings, the power turns off when the instrument has not been operated for four hours.)
To disable this, change the se ings in GLOBAL mode "g14: Power Off" page.
For the following terminals, use a cable of 3 m or less to prevent malfunction.
Headphone jack, DAMPER jack, ASSIGNABLE SW jack, USB B connector
Panel description and functions
DC12V jack
Connect the included AC adapter here.
Connect the AC adapter to the KingKORG NEO
before you plug it into an AC outlet.
ASSIGNABLE SW jack
You can connect a pedal switch
or foot controller here.
DAMPER jack
You can connect a damper pedal here.
OUTPUT jack
You can connect powered monitors, a stereo amp,
mixer, or multi-track recorder to these jacks.
If you're using a monaural connection, connect
the L/MONO jack.
11