Publicidad
Idiomas disponibles
Idiomas disponibles
CHARGING AND BRUSH ROLLER AIR DRYING
NOTE:
If the battery indicator
and the roller air drying indicator
on the display screen do not flash
when charging, ensure that:
• The charging plug is plugged
into the power supply properly.
• The electrical supply at the
outlet is powered on.
• The charging adapter is fully
inserted into the charging port.
NOTE:
Never charge the hard
floor cleaner in temperatures
above 104°F (40°C) or below
39.2°F (4°C). It is normal for the
charger to become warm when
charging.
CAUTION
Moving parts! To reduce the risk of personal injury,
DO NOT touch the brush roller when hard floor
cleaner is on. Always turn off before servicing. Use
caution when operating near children or pets.
FILLING THE CLEAN WATER TANK
1. Press the clean water tank
(CWT) release button to remove
the clean water tank from the
cleaner.
OPERATING INSTRUCTIONS
Clean Water Tank
(CWT) Release Button
WARNING
• Only charge the hard floor
cleaner with the adapter
supplied by the manufacturer.
• To avoid tripping hazards,
place the hard floor cleaner on
the storage base near a wall
during charging.
• During long periods of not
being used,
cleaner must be charged once
every 3 months for optimal
performance. It may take 4±0.5
hours for a full charge.
2. Open the tank cap on the back
of the clean water tank.
- 14 -
the hard floor
Tank Cap
Publicidad
