Sunny SMART SF-RBE4886 Manual Del Usuario página 16

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 5:
Attach the Left Pedal Support Tube (No. 2L)
to the Left Crank (No. 41L) with 1 Left Hinge
Bolt (No. 44L) and 1 Wave Washer (No. 125).
Turn the Left Hinge Bolt (No. 44L)
counter-clockwise with your hand. Then attach
1 Spring Washer (No. 45) and 1 BLACK Left
Nylon Nut (No. 46L) to the end of Left Hinge
Bolt (No. 44L) and turn the BLACK Left Nylon
Nut (No. 46L) clockwise. Tighten with Allen
Wrench (No. 128) and Open End Wrench
(No. 130).
Attach the Right Pedal Support Tube (No.
2R) to the Right Crank (No. 41R) with 1 Right
Hinge Bolt (No. 44R) and 1 Wave Washer
(No. 125). Turn the Right Hinge Bolt (No.
44R) clockwise with your hand. Then attach 1
Spring Washer (No. 45) and 1 WHITE Right
Nylon Nut (No. 46R) to the end of Right
Hinge Bolt (No. 44R) and turn the WHITE
Right Nylon Nut (No. 46R) counter-clockwise.
Tighten with Allen Wrench (No. 128) and
Open End Wrench (No. 130).
NOTE: The Left Hinge Bolt (No. 44L) is
labeled L, while the Right Hinge Bolt (No.
44R) is labeled R.
NOTE: Ensure that all bolts and washers are in
place and partially threaded in before
completely tightening them.
15