Sunny SMART SF-RBE4886 Manual Del Usuario página 17

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 6:
First, fasten 2 Hex Screws (No. 26) from
STEP 3 tightly using 2 Spanners (No. 129).
Then cover with 2 Caps (No. 50).
Second, fasten 2 Nylon Nuts (No. 28) from
STEP 4 using Open End Wrench (No. 130).
NOTE: Ensure that all bolts and washers are
in place and partially threaded in before
completely tightening them.
Remove 4 Screws (No. 23) from Left & Right
Swing Bars (No. 19L & No. 19R) and remove
2 Screws (No. 24) from 2 Protective Covers
A (No. 51a) and 2 Protective Covers B (No.
51b) using Spanner (No. 129).
Attach the 2 Protective Covers A (No. 51a)
and 2 Protective Covers B (No. 51b) to the 2
joints of the Left & Right Swing Bars (No.
19L & No. 19R) and Left & Right Pedal
Support Tubes (No. 2L & No. 2R) with 4
Screws (No. 23) and 2 Screws (No. 24) that
were just removed using Spanner (No. 129).
Insert Left & Right Pedals (No. 49L & No.
49R) through 2 Pedal Straps (No. 3), then
attach Left & Right Pedals (No. 49L & No.
49R) to the Left & Right Pedal Support
Tubes (No. 2L & No. 2R) with 4 Hex Bolts
(No. 15), 4 Flat Washers (No. 35) and 4
Nylon Nuts (No. 30) using Spanner (No.
129).
NOTE: The Left Pedal (No. 49L) is labeled L,
while the Right Pedal (No. 49R) is labeled R.
16