Ideal Test Pro 360 Serie Manual Del Usuario página 14

Battery Replacement
When the multimeter displays the
replaced to maintain proper operation.
To prevent electrical shock hazard, turn off the multimeter and discon-
nect test leads before removing the back cover.
1. Disconnect the test leads and turn the meter off. Remove the test
leads from the front terminals.
2. Position the meter face down. Remove the screws from the case
bottom.
3. Lift the end of the case back until it gently unsnaps.
4. Lift the battery from the case back.
5. Replace battery.
6. Replace the case top. Reinstall screws.
LIFETIME LIMITED WARRANTY
This meter is warranted to the original purchaser against defects in
material or workmanship. During the warranty period, IDEAL
INDUSTRIES, INC. will, at its option, replace or repair the defective
unit, subject to verification of the defect or malfunction.
This warranty does not apply to defects resulting from abuse,
neglect, accident, unauthorized repair, alteration, or unreasonable
use of the instrument.
Any implied warranties arising out of the sale of an IDEAL product,
including but not limited to implied warranties of merchantability
and fitness for a particular purpose, are limited to the above. The
manufacturer shall not be liable for loss of use of the instrument or
other incidental or consequential damages, expenses, or economic
loss, or for any claim or claims for such damage, expenses, or
economic loss.
State laws vary, so the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state.
Page 14
WARNING
the battery must be