Sennheiser HDV 820 Guida Rapida página 14

Putting the HDV 820 into operation
B
10 | HDV 820
Connection possibility of the audio source: digital,
A
USB connection
USB
BAL UNBAL
R L R
- GAIN +
ANALOG IN
Connection cable: USB 2.0 certified cable with type B connector
for connection to the headphone amplifier
▷
More information on using the headphone amplifier connected to
a Mac or PC can be found on page 12.
For best signal transmission and audio quality, use a USB OTG
cable (USB On-the-Go; available from your specialist dealer) to
connect your mobile HiRes audio player or smartphone.
Requirements for digital connections
C
The digital audio inputs DIGITAL IN
audio signals in PCM format (supported sampling rates: optical: up
to 96 kHz, coaxial: up to 192 kHz).
Information on how to set the audio signal of the connected device
to PCM can be found in the Sound or Settings menu or in the instruc-
tion manual of your device.
If an incompatible digital audio signal is being received, the
selection
LED (OPT
tion LED flashes white. Music cannot be reproduced.
OPT USB BAL
COAX R L
DIGITAL IN ANALOG OUT
(OPT
or COAX) lights up white and the
Sound menu*
Digital sound
PCM
Bitstream
* The appearance of the Sound menu can vary
depending on the device you are using
or COAX) can receive digital
DSD reproduc-
Input