Sennheiser HDV 820 Guida Rapida página 19

Example: Microsoft Windows 10
To install the "HDV 820 USB Audio Software Package" and to set the
HDV 820 as the default audio output device:
▷
Install the "HDV 820 USB Audio Software Package". The software
package can be downloaded from the Internet at
www.sennheiser-hearing.com/download or be obtained from
your Sonova Consumer Hearing partner. You need administrator
rights for installation.
▷
Open the Control Panel and select "Sound".
The "Sound" window opens.
▷
Select "HDV 820" as the default audio output device.
▷
Click on "Properties" and, in the "Advanced" tab, select the maxi-
mum sample rate from the "Default Format" drop-down list.
Select "2 channel, 32 bits, 192000 Hz (studio quality)" for the best
possible sound quality.
▷
Click on "OK" to apply the settings.
Putting the HDV 820 into operation
HDV 820 | 15