EMAK SATR 15,5 H Manual De Usuario página 64

in accordance with: Regulation No. 2006/42/EC (government notice NV 176/2008 Coll.)
Regulation No. 2004/108/EC (government notice NV 616/2006 Coll.)
Regulation No. 2000/14/EC (government notice NV 9/2002 Coll.)
A. We: The Seco Group a.s., Šaldova 408/30, Prague 8
závod 02 Jičín, Jungmannova 11
Org ID: 60193450
B. Machine description
- type of machine: Self-propelled mower
- model: AJ 110
- serial number :
Description:
The AJ 110 is a four-wheel self propelled lawnmower with 22HP; 23HP; 24HP Briggs & Stratton motors. The
motor drive is transferred through an electromagnetic clutch using V-belts to the mowing mechanism and
the drive transmission. The mowing mechanism is in a three-rotor arrangement with two blades on each
rotor at two height levels. The blades are driven by a double-sided V-belt. Finely mowed material is directed
directly towards the ground.
C. Regulations by which compliance was judged:
EN 836+A1;2;3, EN ISO 3767;-1,2,3, ISO 11684, EN ISO 11201,
EN ISO 12 100-2, Council Directive No. 97/68/EC (2002/88/EC)
D. Compliance evaluation has been performed according to procedures described in:
- Council Directive No. 2006/42/EC, Article 12, paragraph 2, (equ. § 5, para. 2, NV No. 176/2008 Coll.)
- Council Directive No. 2004/108/EC, Article 7, (equ. § 4, para. 1, NV No. 616/2006 Coll.)
- Council Directive No. 2000/14/EC, Appendix VIII, (equ. appendix 7, NV No. 9/2002 Coll.)
E. Compliance assessment performed by an accredited laboratory:
Accredited testing laboratory no. 1054
Státní zkušebna zemědělských, lesnických a potravinářských strojů a.s.
Molákova 622/11, 163 04 Prague 8, Czech Republic
F. We confirm that:
- this machine as defined in the data provided complies with the requirements given in the aforementioned
technical regulations and is safe under conditions of ordinary use.
- measures have been taken to ensure compliance of all products introduced to the market with the
technical documentation and technical regulations.
- guaranteed acoustic output level is 100 dB(A).
Average measured levels of acoustic output based on the engine used:
Engine
Briggs & Stratton 23 HP VANGUARD 2900±100
Briggs & Stratton 22 HP Intek
Briggs & Stratton 24 HP Intek
Technical documentation of the scope required by appendix VII to regulation 2006/42/EC and by appendix V of
regulation 2000/14/EC is kept by the manufacturer at the following address:
Seco GROUP a. s.
Plant No. 02 Jičín
Jungmannova 11
506 48 Jičín
In Jičín, October 1, 2009
Seco GROUP a.s. is dedicated to continuous development and improvement of all its machines. Therefore, this manual's text and
illustrations may vary from the actual product. No claims can be deduced from this. Print, duplication, publication or translation
(in whole or in part) is prohibited without the written consent of Seco GROUP a.s. The manufacturer reserves the right to change
technical parameters of the product, without prior customer notification.
hereby issue the following declaration:
under supervision of a notified person, LRQA registration No. 0088
Hiramford, Middlemarch Office Village, Siskin Drive
Coventry CV3 4FJ, United Kingdom
RPM (min ) Measured level of acoustic output [dB(A)]
-1
2900±100
2900±100
member of the board
64
99.43
Jiří Pávek