Edox 07 Manual Del Usuario página 12

1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown back-
wards and push it back to position 1.
3. Time setting: hours and minutes. Pull
the crown out to position 3. Turn the
crown forwards or backwards. Push the
crown back to position 1.
Movements 34, 345
Watch functions:
The crown has 4 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown back-
wards and push it back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown for-
wards or backwards. Synchronise the
seconds by pushing the crown back to posi-
tion 1 to coincide with a given time signal.
4. Correcting the day: pull the crown
out to position 3. Turn the crown forwards
until the hands pass midnight. Repeat this
operation until the desired day is reached.
Movements 63, 70
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
12
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
(backwards for references 86) and push it
back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop.
Turn the crown forwards or backwards.
Synchronise the seconds by pushing the
crown back to position 1 to coincide with
a given time signal.
Movement 62
Watch functions:
The crown has 4 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
and push it back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown for-
wards or backwards. Synchronise the
seconds by pushing the crown back to posi-
tion 1 to coincide with a given time signal.
4. Correcting the dual time (GMT): pull
the crown A out to position B. Turn the
crown forwards or backwards to reach the
requested time and push it back to posi-
tion A.
Movement 84
Watch functions:
The crown has 4 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
and push it back to position 1.
3. Correcting the day: pull the crown
out to position 2, turn the crown back-
wards and push it back to position 1.
4. Time setting: hours, minutes and sec-
onds. pull the crown out to position 3. The
seconds hand will stop. Turn the crown for-
wards or backwards. Synchronise the
seconds by pushing the crown back to posi-
tion 1 to coincide with a given time signal.
Movement 843
Watch functions:
The crown has 3 positions.
Position 1: the watch is running.
Position 2: date setting: pull the crown
out to position 2 (the date can also be cor-
rected during the day-changing phase
between 10pm and midnight. The date of
the following day has to be set, because
no automatic date change takes place at
midnight). Turn the crown forwards until
the required date appears. Push the
crown back into position 1.
Quick-chance correction for day of the
week: the second language always first
appears around 12h00 for about 2 hours,
until the display changes to the required
language. Pull the crown out to position 2
(watch is still running). Turn the crown anti
clockwise until the required day of the week
appears in the requested language. Push
the crown back into position 1.
Time setting: pull the crown in position 3
(the watch stops). Turn the crown until the
current time is displayed (remember the
24-hour cycle). Push the crown back into
position 1.