Kärcher Chariot CV 60/1 RS KIRA Autonomous Manual De Instrucciones página 13

Controls
1. Key Switch
2. Emergency Stop Switch
3. Directional Control / Drive Reset Switch
4. Throttle Pedal
5. Maximum Speed Knob
6. Horn Button
7. Steering Wheel
8. Function Mode Switch
9. Display Screen
10. Operator Presence Pedal
11. Start / Pause Robot Button
1. Key Switch
Controls the power for machine functions.
To turn the machine power on, rotate key clockwise.
To turn the machine off, rotate key counterclockwise.
When the key is turned on the display will come on while the system runs self-diagnostics and returns the
brush deck and side broom to their raised positions, if necessary. The controller will not respond to other
commands until this routine is complete.
2. Emergency Stop Switch
This safety feature is designed to cut all power to the machine at any time and apply the brake.
To shut the machine power off, push the Emergency Stop Switch. This will also engage the brake and cause
the machine to stop immediately. Excessive emergency stop usage can cause premature brake wear; use only
when necessary.
To release the emergency stop switch, rotate the switch clockwise.
3. Directional Control / Drive Reset Switch
This safety feature is designed to ensure safe engagement of propel drive. Each time the machine power is
turned on, or each time an operator steps on to the platform, the Drive Reset Switch must be pushed before
machine will propel.
Controls the direction of travel of the vehicle. The light next to the icon on the switch indicates
direction of travel.
To travel forward, press the top button.
To travel in reverse, press the bottom button.
4. Throttle Pedal
Controls the speed of the vehicle within the speed control setting selected, and the maximum speed knob.
Pressing the pedal causes the machine to travel in the direction selected by the Directional Control Switch.
To increase speed, increase pressure on the pedal.
To decrease speed, decrease pressure on the pedal.
5. Maximum Speed Knob
Controls the maximum speed the machine will travel when the throttle pedal is pressed.
To increase speed turn the knob clockwise.
To decrease speed turn the knob counter clockwise.
Operations
13