Safety
Grounding Instructions
THIS PRODUCT IS FOR COMMERCIAL
USE ONLY.
Electrical:
In the USA , the charger for this machine operates on a
standard 15 amp 120V, 60 hz, A.C. power circuit. The
amp, hertz, and voltage are listed on the data label
found on each machine. Using voltages above or below
those indicated on the data label will cause serious
damage to the motors.
Extension Cords
:
If an extension cord is used, the wire size must be at
least one size larger than the power cord on the
machine, and must be limited to 50 feet (15.5m) in
length.
Grounding Instructions:
This charger for this appliance must be grounded. If it
should malfunction or break down, grounding provides
a path of least resistance for electric current to reduce
the risk of electric shock. This appliance is equipped
with a cord having an equipment-grounding conductor
and grounding plug. The plug must be inserted into an
appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordi-
nances.
GROUNDED
OUTLET
GROUNDING
PIN
8
GROUNDED
OUTLET BOX
METAL SCREW
(A)
8.644-976.0 Manual Operator CV601 RS KIRA
120 Volt Models:
The charger for this appliance is for use on a nominal
120-volt circuit, and has a grounded plug that looks like
the plug in "Fig. A". A temporary adapter that looks like
the adapter in "Fig. C" may be used to connect this plug
to a 2-pole receptacle as shown in "Fig. B", if a properly
grounded outlet is not available. The temporary adapter
should be used only until a properly grounded outlet
(Fig. A) can be installed by a qualified electrician. The
green colored rigid ear, lug, or wire extending from the
adapter must be connected to a permanent ground
such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place
by a metal screw.
For countries other than the U.S., the cord for that
country will automatically adjust to the correct voltage
for the charger.
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
Check with a qualified electrician or service person
if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug
provided with the appliance - if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
(B)
ADAPTER
TAB FOR
GROUNDING SCREW
(C)