Maintenance
Vacuum Filters
1. Vacuum Pre Filter
2. Vacuum Post Filter
3. Knob
28
Changing the Bag, Pre Filter or Post Filter
1. Lift lid to replace bag or pre filter.
2. Release bag from debris snout.
3. Place new bag over debris snout and ensure card
4. To replace pre filter simply remove old and insert
5. To replace post filter, remove left door, remove filter
8.644-976.0 Manual Operator CV601 RS KIRA
board flange is engaging bag presence switch.
new under clips.
knob and slide filter of post mount. Reverse to
install.