Kärcher Chariot CV 60/1 RS KIRA Autonomous Manual De Instrucciones página 31

Electric Brake Engagement
FOR SAFETY: Before leaving or servicing machine,
stop on a level surface, turn off machine and
remove key.
Electric Brake Engagement
This machine is equipped with an electric brake.
The brake automatically engages and keeps the
machine from moving whenever the operator steps off
the platform or when emergency stop is engaged.
The brake has a mechanical over-ride that can be
engaged so machine can be pushed or towed (slowly).
To disengage brake:
1. Rotate lever up.
Do not operate machine with brake disengaged.
8.644-976.0 Manual Operator CV601 RS KIRA
Transporting
Pushing Machine
The machine may be pushed for short distances at
speeds not to exceed 5 mph. Be careful to avoid
damaging machine. The machine may be pushed by
hand from the rear.
NOTE: To avoid damage caused by regenerative
voltage, disconnect traction motor before towing or
pushing machine.
Trailer Loading/Unloading
Brush deck must be in the up position before loading.
Park machine in a corner of the trailer with padding
between machine and the walls, Once loaded, lower
brush deck, turn off machine, and ensure brake is
engaged. Block the tires to prevent the machine from
rolling.
Place a strap wrapping around the machine pulling it
into the corner with padding between the machine and
the strap.
Reverse process to unload.
Maintenance
31