Maintenance
Error Codes Table, cont.
Code
Description of Code
Operator presence invalid
38
state
39
Pre-charge Error
3A
DMC1 CAN connection failure
3B
DMC2 CAN connection failure
3C
HMI CAN connection failure
Both DMC CAN connection
3D
failure
Lithium battery - Battery
3E
General BMS Alarm
Lithium battery - Battery High
3F
Voltage Alarm
Lithium battery - Battery Low
40
Voltage Alarm
Lithium battery - Battery High
41
Temperature Discharge Alarm
Lithium battery - Battery Low
42
Temperature Discharge Alarm
Lithium battery - Battery High
43
Temperature Charge Alarm
Lithium battery - Battery Low
44
Temperature Charge Alarm
Lithium battery - Battery High
45
Discharge Current Alarm
Lithium battery - Battery High
46
Charge Current Alarm
Lithium battery - Battery
Missing Battery Alarm (Active
47
battery count does not equal
configured number)
Lithium battery - Battery
48
Internal BMS Alarm
4A
Charger - H002
4B
Charger - H003
4C
Charger - H004
4D
Charger - F001
4E
Charger - F002
4F
Charger - F003
36
Corrective Actions –
If the problem persists, call for service
Turn the main breaker off and wait 10 seconds before turning it
.
back on
Turn the main breaker off and wait 10 seconds before turning it
.
back on
Turn the main breaker off and wait 10 seconds before turning it
back on.
Turn the main breaker off and wait 10 seconds before turning it
back on.
Turn the main breaker off and wait 10 seconds before turning it
back on.
Turn the main breaker off and wait 10 seconds before turning it
back on.
Turn the main breaker and battery off and wait 10 seconds before
turning them back on.
Turn the main breaker and battery off and wait 10 seconds before
turning them back on.
Turn the main breaker and battery off and wait 10 seconds before
turning them back on.
Turn the main breaker and battery off and wait 10 seconds before
turning them back on.
Turn the main breaker and battery off and wait 10 seconds before
turning them back on.
Turn the main breaker and battery off and wait 10 seconds before
turning them back on.
Turn the main breaker and battery off and wait 10 seconds before
turning them back on.
Turn the main breaker and battery off and wait 10 seconds before
turning them back on.
Turn the main breaker and battery off and wait 10 seconds before
turning them back on.
Turn the main breaker and battery off and wait 10 seconds before
turning them back on.
Turn the main breaker and battery off and wait 10 seconds before
turning them back on.
Unplug charger wait 10 seconds before plugging it back in.
Unplug charger wait 10 seconds before plugging it back in.
Unplug charger wait 10 seconds before plugging it back in.
Unplug charger wait 10 seconds before plugging it back in.
Unplug charger wait 10 seconds before plugging it back in.
Unplug charger wait 10 seconds before plugging it back in.
8.644-976.0 Manual Operator CV601 RS KIRA