Maintenance
Service Schedule
MAINTENANCE
Check that the vacuum box lid seals
tightly
Check for damaged or worn tires.
Check brushes for proper installation.
Check vacuum hose connections.
Check hoses for debris buildup.
Check pedal(s), brake and steering for
proper operation
Clean brush tray
Clean inside brush housing
Clean brushes and check wear.
Remove bearing cap from end of brush.
Clean bearing and cap.
Empty debris tray
Check vacuum bag fullness and change if
necessary.
Charge batteries.
Clean off top of batteries.
Check battery connections are tight.
Clean battery cases and compartment.
Inspect and replace all filters including
exhaust, and intake.
Check brake.
Check all motors for carbon brush wear.
Check motor commutators.
Check steering chain tensioner.
Check brush deck guard rods for
excessive wear.
Check wiring and other electrical compo-
nents for frays, heat discoloration,
cracked or hardened insulation, broken or
loose connections, and other defects.
Failure to perform scheduled service can result in machine damage and loss of machine function.
18
BEFORE
AFTER EACH
EACH WORK
PERIOD
*
*
*
*
*
*
8.644-976.0 Manual Operator CV601 RS KIRA
WORK
50 HRS
PERIOD
*
*
*
*
*
*
*
*
*
100 HRS
200 HRS
*
*
*
*
*
*
*
*