FITFIU ELITE Manual Del Usuario página 100

Component or Condition
Hub bearings
Chain lubrication
Derailleur adjustment
Reflectors
Battery and charger
Headset
Bottom bracket
All bolts, nuts, and mounting
hardware
* Every 5 to 10 rides depending on length and conditions of the ride.
SERVICE & MAINTENANCE SCHEDULE
Some service and maintenance can and should be performed by the owner, and require no special tools
or knowledge beyond what is presented in this manual.
The following are examples of the type of service you should perform yourself. All other service,
maintenance and repair should be performed in a properly equipped facility by a qualified FITFIU E-Bike
mechanic using the correct tools and procedures specified by the manufacturer.
BREAK-IN PERIOD
Your E-Bike will last longer and work better if you break it in before riding it hard. Control cables and
wheel spokes may stretch or sear when a new E-Bike is first used and may require readjustment by
your dealer. Your mechanical safety check will help you identify some things that need readjustment.
But even if everything seems fine to you, it is best to take your E-Bike back to the dealer for a check-
up. Dealers typically suggest you to bring the E-Bike in 30 days for a check-up. Another way to judge
when it's time for the first check-up is to bring the E-Bike in after 10 to 15 hours of use. But if you think
something is wrong with the FITFIU E-Bike, ask your dealer before riding it again.
Inspect Inspect
before periodically
every ride *
x
x
x
x
x
x
x
100
Clean
Adjust/
and/or
Tighten
lubricate
x x
x
x x
x x
x x
x
Repair/
Replace
If
necessary
x
x
x