Publicidad
Idiomas disponibles
Idiomas disponibles
BASIC MAINTENANCE
•
The following procedures will help you maintain your hybrid electric bicycle for years of enjoyable
riding.
•
Properly maintain the batteries by keeping them fully charged when not in use.
•
Do not ride your electric bicycle in the water (damp roads, puddles ,rain, streams, etc.) and never
immerse it in water as the electrical system may be damaged.
•
Periodically check the wiring and connectors to ensure there is no damage and the connectors
have good continuity.
•
For painted frames, dust the surface and remove any loose dirt with a dry cloth. Clean and wipe with
a damp cloth soaked in a mild detergent mixture. Dry with a cloth and polish with car or furniture
wax. Use soap and water to clean plastic parts and rubber tires. Chrome plated bikes should be
wiped over with a rust preventative fluid.
•
Store your bicycle under shelter. Avoid leaving it in the rain or being exposed to corrosive materials.
•
Riding on the beach or in coastal areas exposes you bicycle to salt which is very corrosive. Wash
your bicycle frequently and wipe or spray all unpainted parts with an anti-rust treatment. Make sure
wheel rims are dry so braking performance is not affected. After rain, dry you bicycle and apply
anti-rust treatment.
•
If the hub and bottom bracket bearings of your bicycle have been submerged in water, they should
be taken out and re-greased. This will prevent accelerated bearing deterioration.
•
If paint has become scratched or chipped to the metal, use touch up paint to prevent rust. Clear nail
polish can also be used as a preventative measure.
•
Regularly clean and lubricate all moving parts, tighten components and make adjustments as
required.
ELECTRIC BYCICLE SAVAGE
103
EN
Publicidad
