Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
Problem
Engine is slowing down and
stops
Attachment tool does not
rotate smoothly, abnormal
noises can be heard
Device works with interrup-
tions
Disposal/
environmental
protection
The device, accessories and packaging
should be properly recycled.
Electrical devices must not be dis-
posed of with domestic waste.
The symbol of the crossed-out wheeled bin
means that this product must not be dis-
posed of as unsorted municipal waste at
the end of its useful life.
Directive 2012/19/EU on waste
electrical and electronic equip-
ment:
Consumers are legally obliged to recycle
electrical and electronic equipment in
an environmentally sound manner at the
end of its life. In this way, environmentally
friendly and resource-saving recycling is
ensured.
Depending on the implementation in na-
tional law, you may have the following op-
tions:
• Return to a shop,
• Hand over to an official collection
point,
• Return to the manufacturer/distributor.
44
Possible cause
Device is overloaded through
workpiece
Clamping nut (18) loose
Attachment tool defective
Internal loose contact
On/Off switch (5) is broken
This does not affect accessories enclosed
with the old devices or tools without any
electrical components.
Service
Guarantee
Dear Customer,
This product is provided with a 3 year
guarantee from the date of purchase.
In case of defects, you have statutory
rights against the seller of the product.
These statutory rights are not restricted by
our guarantee presented below.
Terms of Guarantee
The guarantee period begins on the date
of purchase. Please retain the original re-
ceipt. This document is required as proof
of purchase.
If a material or manufacturing defect oc-
curs within three years of the date of pur-
chase of this product, we will repair or
replace – at our choice – the product
for you free of charge. This guarantee re-
quires the defective product and proof of
purchase to be presented within the three-
year period with a brief written description
of what constitutes the defect and when it
occurred.
If the defect is covered by our guaran-
tee, you will receive either the repaired
Error correction
Reduce pressure on attach-
ment tool
Workpiece unsuitable
Tightening the clamping nut
Changing the attachment
tool
contact the service centre.
Publicidad
