Metabo SSP 12 Instrucciones De Manejo página 9

Operating Instructions
Dear Customer,
Thank you for the trust you have placed in us by buying a Metabo power tool. Each Metabo power
tool is carefully tested and subject to strict quality controls by Metabo's quality assurance. Never-
theless, the service life of a power tool depends to a great extent on you. Please observe the infor-
mation contained in these instructions and the enclosed documentation. The more carefully you
treat your Metabo power tool, the longer it will provide dependable service.
Contents
1 Conformity Declaration
2 Specified Use
3 General Safety Instructions
4 Special Safety Instructions
5 Overview
6 Special Product Features
7 Initial Operation/Setting
7.1 Removing/inserting battery pack
7.2 Setting the direction of rotation,
engaging the transporting safety
device (switch-on lock)
7.3 Switching on and off
7.4 Stepless altering of speed / tightening
torque
7.5 Changing screwdriving bit
8 Use
9 Accessories
10 Repairs
11 Environmental Protection
12 Technical Specifications
1 Conformity Declaration
We, being solely responsible, hereby declare that
this product conforms to the standards and direc-
tives specified on page 2.
2 Specified Use
The battery-operated power tool is used for
driving in and removing screws.
The user bears sole responsibility for damage
caused by improper use.
Generally accepted accident prevention regu-
lations and the enclosed safety information
must be observed.
3 General Safety
Instructions
WARNING – Reading the operating
instructions will reduce the risk
of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety
warnings and instructions may result in electric
shock, fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Before using the power tool, carefully read through
and familiarise yourself with all the enclosed safety
information and the Operating Instructions. Keep
all enclosed documentation for future reference,
and pass on your power tool only together with this
documentation.
4 Special Safety
Instructions
For your own protection and the
protection of your power tool,
observe the passages marked by this
symbol!
Protect battery packs from water and moisture!
Never use faulty or deformed battery packs!
Do not expose battery packs to naked flame!
Do not open battery packs!
Do not touch or short-circuit battery packs!
Caustic fluid may leak from defective
NiCd or NiMH battery packs (30%
caustic potash solution)!
Slightly acidic, flammable fluid may leak
from defective Li-Ion battery packs!
If battery fluid from NiCd, NiMH or Li-Ion battery
packs leaks out and comes into contact with the
skin, rinse the affected area thoroughly with
water. If battery fluid leaks out and comes into
contact with your eyes, wash them with clean
water and seek medical treatment immediately!
ENGLISH
ENG
9