Dolmar ES-173 A Instrucciones De Manejo página 17

Technical data
Chain type
Chain pitch
Length of a cut
Max. chain speed
Sound power level L
WA av
per EN 60745
Sound pressure level L
at the workplace per EN 60745
Uncertainty
Vibration acceleration a
per EN 60745
- Tubular handle
- Rear handle
Uncertainty
Oil pump
Oil tank capacity
Power transmission
Overload protection
Chain brake
Run-out brake
Weight
(Weight according to EPTA-
Procedure 01/2003)
Protective case
Extension cable
(not included)
• Due to our continuing programme of research and development, the specifi cations herein are subject to change
without notice.
• Specifi cations may diff er from country to country.
• The declared vibration emission value has been measured in accordance with the standard test method and may be
used for comparing one tool with another.
• The declared vibration emission value may also be used i n a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power tool can diff er from the declared emission value depending on
the ways in which the tool is used.
• Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time).
inch
cm
m/s
dB (A)
dB (A)
pA av
dB (A)
h,w av
m/s
2
m/s
2
m/s
2
ml
kg
ES-153 A ES-163 A
ES-2130 A ES-2135 A
092 (91VG)/492 (91PX)
30 35
manually actuated
5.0 5.1
class II (double protective insulation)
DIN 57282/ HO 7RN-F
L= 30 m max., 3x1.5 mm
ES-173 A
ES-2140 A
3/8"
40
13.3
101.8
90.8
K=0.73
4.7
5.6
K=1.5
automatic
140
direct
electrical
electrical
5.2
2
ES-183 A
ES-2145 A
45
5.3
17