Publicidad
Idiomas disponibles
Idiomas disponibles
Follow the instructions below to connect the PF 90 to a computer.
A. Signal connector: 15 pin mini D-Sub (PS / 2 or PC / AT compatible model)
Connect the signal cable to the 15 pin mini D-Sub connector on the display unit.
B. Signa! connector: 15 pin D-Sub (Apple computer)
Convert a MAC 15 pin D-Sub connector to a 15 pin mini D-Sub connector using a Panasonic MAC
adapter, and connect it to the 15 pin mini D-Sub connector on the display unit.
< REAR PANEL >
Pin assignments of 15 pin mini D-Sub connector
En E
oe
2]
Green video signal
3]
Blue video signal
|
o
—_
|
ç 5
(Gun
__
|]
|
6
| Ground tor Red video signai
|
Ground
for Blue video signal
|
9
| Unused
Cid
|
n 10
| Grud
|
Ground
|
12
|
SDA' (Bi-directional Data
*: "VESA's Display Data Channel (DDC) Standard
C. Signal connector: BNC connector
Sync on green system
Connect the signal cable to RED, GREEN (sync
ongreen) and BLUE BNC connectors.
Composite sync system
Connect the signal cable to RED, GREEN, BLUE
and H-SYNC (H / V composite) BNC connectors.
O ER as ED
Separate sync system
Connect the signal cable to RED, GREEN, BLUE,
H-SYNC and V-SYNC BNC connectors.
CRE
Note : If your computer's video output is over
110 MHz, it is recommended that it be
External View
used with the BNC connectors.
Dimensions
Width
:
468.4 mm (18.4")
Height
:
459 mm (18.1")
Depth
: 443.5 mm (17.5")
Base diameter
: 0 255 mm (¢ 10.0")
Pan / Tilt range
Up
: 12 degrees
Down
:
SS degrees
Left, right
: 90 degrees each
Publicidad
