Publicidad
Idiomas disponibles
Idiomas disponibles
12
Adjustments (Continued)
Adjustment menu
Conve rgence : Convergence is affected by geomagnetism. Use this function when
convergence error occurs after moving the monitor or changing the screen
angle.
These convergence adjustments should be made after monitor operation
has stabilized.
[nike] H.Convergence
: Horizontal convergence of the image (color fringing) can be adjusted.
Press [2] key to toggle between H.Convergence and V.Convergence.
Note: If the [4 and BJ keys are pressed at the same time on the
H.Convergence adjustment screen, the standard level (50) will
be set.
Press the Bl key to move red to the right and blue to the left.
Press the [4 key to move red to the left and blue to the right.
[=
V.Convergence
. Vertical convergence of the image (color fringing) can be adjusted.
Press [2] key to toggle between V.Convergence and H.Convergence.
Note: If the di and Pl keys are pressed at the same time on the
V.Convergence adjustment screen, the standard level (50) will
be set.
Press the à] key to move red downwards and blue upwards.
Press the Id key to move red upwards and blue downwards
Purity : Press the [2] key to select the Purity 1 / Purity 2 / Purity 3 / Purity 4 adjustments.
|]
Pur ity 1 : Uneven color at the top left can be adjusted.
LY Pu rity 2 : Uneven color at the top right can be adjusted.
Ld Pur ity 3 : Uneven color at the bottom right can be adjusted.
L] Purity 4 : Uneven color at the bottom lett can be adjusted.
==] Linearity-C : The image can be adjusted for vertical linearity in the center.
Press [2] key to toggle between Linearity-C and Linearity-E.
Note: If the di and B keys are pressed at the same time on the Linearity-C
adjustment screen, the standard level will be set.
Press the B®) key to make the center linearity narrower.
Press the [4 key to make the center linearity wider.
E
Linearity-E . The image can be adjusted for vertical linearity in the edge.
Press [2] key to toggle between Linearity-E and Linearity-C,
Note: If the (4 and B keys are pressed at the same time on the Linearity- E
adjustment screen, the standard level will be set.
Press the $] key to make the bottom linearity wider.
Press the Æ key to make the top linearity wider.
Publicidad
