Klarstein TURBODRAFT Manual Del Usuario página 88

EN
88
What
Spilled food or liquids on
the function keys.
Overcooked, melted or
hot, sugary residues and
splashes on the glass.
How
1. Turn the hotplate
off.
2. Soak the residues.
3. Wipe the keys with
a damp cloth, soft
sponge or kitchen
towel.
4. Follow steps 2-4
under "Daily
contamination".
Remove the dirt with
a carpet knife, a razor
blade or a scraper for
ceramic hotplates, but
be careful not to burn
yourself on the hot
hotplate.
1 Turn the hotplate off.
2 Hold the scraper at a
30° angle and scrape
the dirt into a cold
corner of the hotplate.
3 Remove the dirt with
a cloth or kitchen
towel.
4 Follow steps 2-4
under "Daily
contamination".
Important!
• The hotplate may
beep, switch itself
off and the buttons
may stop working
while there is liquid
on them. Make sure
that the buttons are
clean and dry before
switching the plates
back on.
• Remove the stains
and splashes im-
mediately, as they
are more difficult to
remove once they
have become cold.
• Attention: risk of
injury! As soon as
the safety cover is
removed from the
carpet knife, the
sharp knife will stick
out. Handle it care-
fully so that you do
not injure yourself.