Klarstein TURBODRAFT Manual Del Usuario página 94

EN
94
Problem
Insufficient extraction of
the hood.
The device is tilted.
The LED does not light
up when the device is
plugged in.
Some buttons do not
work or the LED display
is abnormal.
The cooking mode
indicator lights up, but
the heating process does
not start.
Potential cause
The distance between
the extractor hood and
the cooking surface is
too great.
Too much draft through
open doors or windows.
The mounting screws
are not tightened.
The suspension screws
are not tightened
enough.
No power.
The circuit board and the
connected display are
faulty.
The circuit board is
damaged.
The display is damaged.
The display is damaged.
The hob is too hot.
The fan is not working
properly
The power supply circuit
board is damaged.
Solution
Reduce the distance.
Close open doors or
windows.
Tighten the fixing screw
and set it level.
Tighten the suspension
screw and set it level.
Have the device checked.
Have the connection
checked.
Have the circuit board
replaced.
Have the display
replaced.
Have the display
replaced.
Let the hob cool down
and check whether the
ventilation openings are
blocked.
Check whether the fan is
running normally. Have
it replaced if necessary.
Have the circuit board
replaced.