Klarstein TURBODRAFT Manual Del Usuario página 97

Code Potential cause
10 NTC failure on the surface of
the oven.
11 Internal error, open plate, no
sync signal.
12 The fan is not working.
13 The device runs dry.
14 Internal error on the display
board
Solution
Have the cooktop surface
temperature sensor checked
to ensure that it is in contact
with the cooktop surface and
that there is glass adhesive
contact.
Have checked whether the
cable pulley is not receiving
a sync signal and decide
whether the cable pulley needs
to be replaced.
Check if the fan is on or restart
the device again.
Turn off the device and restart
it.
Have the display board
replaced.
EN
97