Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting using ES-LINK Analog
ES-LINK Analog overview
The current transmission method utilizes the performance of HCLD
buffer circuits that feature the ability to supply strong current at high
speed. This suppresses the impact of impedance on signal paths,
enabling pure and powerful transmission of signals.
o Use connection cables that are shielded and balanced.
o Ordinary balanced cables (with XLR connectors) are used for
connection. These connectors can only be used with compatible
devices, however, because the transmission format is unique.
Connecting source devices using ES-LINK
Analog
Analog audio output (ESL-A)
connectors
Source device
ATTENTION
Set the analog output setting to ESLA on the source device before
connecting it.
Use XLR cables to connect the analog audio output (ESL-A) con-
nectors on the source device to the analog audio input (ESL-A)
connectors on this unit.
o Set the operation mode to ESLA for the input connectors on this
unit that are connected to the source device (page 26).
12
Connecting to a power amplifier using
ES-LINK Analog
Power amplifier that supports
ES-LINK Analog input (ESL-A)
Use XLR cables to connect the analog audio output (ESL-A) connec-
tors on this unit to the ES-LINK Analog input (ESL-A) connectors on
the power amplifier.
o Set the power amplifier input selector to ESLA.
o Press the OUTPUT button to set the output connectors to SP+PRE
or PRE (page 20).
ATTENTION
The ESL-A output connectors of this unit are female-type connectors
to prevent accidental connection with XLR output connectors.
ES-LINK Analog
connectors
Publicidad
