Publicidad
Idiomas disponibles
Idiomas disponibles
Automatic power saving function
APS>***
If there is no audio input (continuous silence) from the selected input
source for the set amount of time, the unit will enter standby mode
automatically.
o By default, the setting is OFF.
o Audio input from input sources other than the one selected
has no effect on the operation of the automatic power saving
function.
30m
30 minutes
60m
60 minutes
90m
90 minutes
120m
120 minutes
OFF
The automatic power saving function is disabled.
Illumination
Light>***
How the rings around the INPUT and VOLUME knobs light can be set.
o By default, the setting is AUTO.
AUTO
When the knobs are operated, their rings light.
ON
The rings around the knobs are always lit.
OFF
The rings around the knobs are always unlit.
Knob illumination brightness
LightV>***
The brightness of the illumination around the knobs can be set.
o By default, the setting is 5.
5 (normal brightness)
c
4
c
3
c
2
c
1 (dim)
CPU operation stopped status display
CPUdp>***
o By default, the setting is ON.
OFF
CPU operation stopped status will not be shown.
ON
"CPU off" will be shown when operation of the CPU that controls
this product stops. When the main unit (knobs/buttons) or remote
control is operated, operation will resume to control the product.
When done, it will automatically stop operating again.
o If the APS function is not set to OFF, operation of the CPU will
not stop so the operation status can be checked and the time
can be measured.
o When DPaOFF is set to ON or DIM, the CPU will not stop opera-
tion until the display turns off automatically.
o When the RS232C external control setting is ON, the CPU will
not enter operation stopped mode because it is waiting to
receive external control.
o When the illumination setting (Light>) is ON, the CPU will not
enter operation stopped mode because it is constantly adjust-
ing the brightness.
Opening MENU 3
goto MENU3
Press and hold the MENU button to open MENU 3.
25
Publicidad
