Publicidad
Idiomas disponibles
Idiomas disponibles
English
Electric oven
HM973IXD
Description of the appliance
1 - Oven function selection knob
2 - Temperature control knob
3 - Timer
4 - Oven door handle
5 -
tray
6 - Oven shelf
Installation
The kitchen area should be dry and well ventilated.
When installing the oven, easy access to all control elements should be
ensured.
This is a built-in oven, and its back wall and one side
wall can be placed next to a tall kitchen unit or a
veneer used on fitted furniture must be applied with a heat-resistant
adhesive (100℃). This prevents surface deformation or detachment of the
coating
Ensure the aperture is as per the dimensions in the diagram.
Connect the oven to the mains when it is fully installed.
Insert the oven completely into the aperture ensuring the four screws as
shown in the diagram will stay in place.
Product Dimensions
Height: 595mm
Width: 595mm
Depth: 530mm
Electrical connection
Warning
All electrical work must be carried out by a qualified electrician. No alterations or changes in the
electricity supply should be carried out.
Fitting guidelines
The oven is manufactured to work with three- phase alternating current (220V- 240V, 50Hz). The oven
is equipped with a lead and plug.
Warning!
Remember to connect the safety circuit to the connection box terminal marked with the electricity supply
for the oven must have a safety switch which enables the power to be cut off in case of emergency. The
distance between the working contacts of the safety switch must be at least 3 mm.
Aperture Dimensions
600mm
560mm
560mm (min)
wall. Coatings or
Publicidad
