Publicidad
Idiomas disponibles
Idiomas disponibles
Before connecting the oven to the power supply, it is important to read the information on the data plate
and the connection diagram.
CONNECTION DIAGRAM
Caution! Voltage of heating elements 220V- 240V
Caution! In the event of any connection the safety
wire must be connected to the
For 220V-240V earthed one phase connect on:
Brown wire connect to L and blue wire connect to
N, safety wire (Yellow green) connect to
Before first use
Remove all packaging material, tapes, polystyrene, etc. and clean the interior of the oven with warm
water and washing-up liquid.
Remove and wash the oven accessories with warm soapy water.
Switch on the ventilation in the room or open a window.
Heat up the oven to a temperature of 250°C for approx. 30 min., when the oven has cooled down,
clean the cavity with warm water and dry thoroughly.
Important!
The inside of the oven should only be washed with warm water and a small amount of washing-up
liquid.
PE terminal
Publicidad
