Taurus HM973IXD Manual De Instrucciones página 17

During the period of cooking, the display can show the current clock and countdown time by pressing
"+" or "-".
The cooking duration time can be set, but if the cooking end time is not set 5 seconds after it or by
pressing , the oven will automatically start heating up. When the duration is reached, it will stop
automatically.
You can set directly the end cooking time, without setting duration. Then the oven will automatically
start heating immediately and when the end cooking time is reached, it will stop.
Oven on and off
In order to switch on the oven, you need to:
Set required working conditions of the oven, it's temperature and a mode of heating.
Set the knob to the required position, turning it right.
Oven functions and operation.
Natural convection oven (conventional)
The oven can be warmed up using the bottom and top heaters. The operation of the oven is controlled
by the oven function selector knob. To set a required function, simply turn the knob to the required
position.
as well as the temperature regulator knob, to set a required function you should turn
the knob to the selected position.
The oven can be switched off by setting both of these knobs to the position 0.
Caution!
In the grilling function position, when setting the temperature regulator to a position other than zero, the
red light may come on, although the oven is not being warmed up.
OVEN FUNCTIONS
Separate Oven Light
By setting the knob to this position, the light inside the oven is switched on.
Use it for example when cleaning the oven cavity.
Defrosting
This function allows all frozen foods to be rapidly
and delicately thawed thanks to the internal fan.
Bottom heater on
When the knob is set to this position the oven is heated using only the bottom
heater. Use for e.g. final baking from the bottom.