Husqvarna PG 280 S Manual Del Usuario página 14

7. If it is necessary to grind on the left side, the wheels
must point in right direction.
8. For straight wheel direction, align the red mark on
the wheel axle (A) with the red mark on the frame
(B).
A
B
To replace the diamond tools
WARNING:
WARNING:
very hot. Use protective gloves.
1. Set the ON/OFF switch to 0 and disconnect the
power plug to stop the product. Refer to
product on page 12 .
2. Push the emergency stop button.
3. Put the product in servicing position.
CAUTION:
the servicing position on a horizontal
surface.
14
Disconnect the power plug.
Diamond tools can become
To stop the
Only put the product in
a) For PG 280
b) For PG 280 S
4. Use a hammer to remove the diamond tools.
2112 - 002 - 24.10.2023