Husqvarna PG 280 S Manual Del Usuario página 19

To set the product in transport position
PG 280 S
1. Disconnect the motor cable from the electric
enclosure.
2. Pull out the locking pins (A) and remove the lock
bolts (B) on each side of the grinding head.
B
2112 - 002 - 24.10.2023
A
3. Remove the wheel chassis from the grinding head.
CAUTION:
frame, it will fall down.
4. Put down the frame on the floor with the rubber
bumper as support to prevent it to fall down.
Do not let go of the
19