Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction..................................................................... 2
Safety..............................................................................5
Operation........................................................................ 9
Maintenance................................................................. 15
Owner responsibility
WARNING:
stone by methods such as cutting, grinding
or drilling, especially during dry operation,
generates dust that comes from the material
being processed, which frequently contains
silica. Silica is a basic component of sand,
quartz, brick clay, granite and numerous
other minerals and rocks. Exposure to
excessive amount of such dust can cause:
Respiratory disease (affecting your ability
to breathe), including chronic bronchitis,
silicosis and pulmonary fibrosis from
exposure to silica. These diseases may be
fatal;
Skin irritation and rash.
Cancer according to NTP* and IARC* */
National Toxicology Program, International
Agency for Research on Cancer.
Take precautionary steps:
Avoid inhalation of and skin contact with
dust, mist and fumes.
Wear and ensure that all bystanders
wear appropriate respiratory protection such
as dust masks designed to filter out
microscopic particles. (See OSHA 29 CFR
Part 1926.1153)
To minimize dust emissions, use water
to bind the dust, when feasible. If dry
2
Contents
Introduction
Processing of concrete and
Troubleshooting............................................................ 16
Transportation and storage...........................................17
Technical data.............................................................. 21
operation is necessary, use an appropriate
dust extractor.
It is the owner's/employer's responsibility that the
operator has sufficient knowledge about how to use the
product safely. Supervisors and operators must have
read and understood the Operator's Manual. They must
be aware of:
•
The product's safety instructions.
•
The product's range of applications and limitations.
•
How the product is to be used and maintained.
National/Local regulations could restrict the use of this
product. Find out what regulations are applicable where
you work before you start using the product.
Product description
The product is a power grinder for concrete surfaces
of different hardness. The grind range is from rough
surfaces through to smoother finish.
For example, the product has these functions:
•
A grinding head cover that adjusts the movement to
the surface layer.
•
A grind area of 280 mm.
Intended use
The product is used to grind concrete and other types of
hard floors. Only use the product on dry surfaces.
The product is used in commercial operations by
professional operators. Do not use the product for other
tasks.
2112 - 002 - 24.10.2023
Publicidad
