Publicidad
Idiomas disponibles
Idiomas disponibles
•
Do a check of the safety devices regularly. If the
safety devices are damaged or do not operate
correctly, speak to your Husqvarna service agent.
•
Do not make modifications to safety devices.
ON/OFF switch
The ON/OFF switch is used to start and stop the
product.
To do a check of the ON/OFF switch
1. Push down the handle to lift the grinding head from
the floor. The pressure between the grinding head
and the floor decreases.
2. Set the ON/OFF switch to 1 to start the product.
3. Wait for 5 seconds to let the product operate at idle
speed.
8
4. Set the ON/OFF switch to 0 to stop the product.
Emergency stop
The emergency stop is used to quickly stop the motor.
The emergency stop at the product breaks the mains
power supply.
To do a check of the emergency stop
1. Push the emergency stop button (A) and make sure
that the motor stops.
-1 mm
2. Turn the emergency stop button clockwise (B) to
disengage.
Safety instructions for maintenance
A
WARNING:
Read the warning
instructions that follow before you use the
product. Save all warnings and instructions
for future operations.
2112 - 002 - 24.10.2023
B
Publicidad
