Husqvarna PG 280 S Manual Del Usuario página 20

To disassemble the frame PG 280 S
1. Remove the screws (A) on the frame.
A
2. Pull out the frame (B).
To attach the product to a vehicle for
transportation
Attach the product during transportation in order to
prevent accidents and damage to the equipment. The
product has holes that are used with straps to attach the
product to the vehicle.
1. Attach the strap into the holes.
20
B
A
3X
2. Attach and tighten the strap to the vehicle.
To lift the product
1. Use the lifting eye to lift the product.
2. Make sure that the product is balanced when you lift
it. Let a bystander help you when you lift the product.
Storage of the product
• Storage of the product must be indoors only.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Keep the product in a dry and frost free area.
2112 - 002 - 24.10.2023