Be Cool SPACE Instrucciones página 19

EN
4_ CLOTH COVER CLEANING
1. Hide the harness and take apart the pad.
2. Take apart the cloth cover on head rest.
3. Undo the button and take apart the cloth cover below the head rest.
4. Take apart the rest cloth cover.
The opposite way is how to put on the cloth cover.
5. MAINTENANCE
Store the harness away and remove the padding.
Take the fabric cover off the headrest.
Unfasten the button and remove the fabric cover from the lower part
of the headrest.
To fit the fabric cover again, follow the same steps in reverse order.
The safety lock is not working properly if the following situations
occur:
1) When you press the red button it opens slowly
2) It is not possible to insert the metal parts of the safety lock into the
fastener or, when they are inserted they automatically come loose
36
again.
3) The safety button does not emit the safety click.
4) It is difficult to insert the metal parts into the safety lock.
5) Excessive force is required to open the safety lock.
The 5-point safety harness is very important for the child's safety.
Incorrect use of the 5-point harness may put the child's safety at risk.
Do not use oils or other lubricants on the safety lock. Defects in the
functioning of the safety lock are usually caused by inserting foreign
objects into the lock.
RECOMMENDATIONS
Check all the parts of the safety seat before using it. Make sure that it
is in good condition as this will reduce the risk of an accident.
Check that the seat belts are not too loose before use.
Do not expose the safety seat to excessively cold or hot temperatures,
or damp environments.
Keep the instruction manual in a safe place.
In the event of an accident replace the car seat with a new one.
Contact your retailer if you have any questions.
GUARANTEE INFORMATION
- This item is guaranteed against manufacturing defects as stipulated
in the legal Directives and/or regulations in force on guarantees for
consumer goods applicable to the European Union and those of the
country in which it is marketed.
- It is essential to present the purchase invoice or receipt in order to
process the guarantee through the seller of the item or, failing that,
through the manufacturer.
- The guarantee excludes anomalies or faults caused by misuse,
non-compliance with the safety regulations and instructions for
use and maintenance provided, or due to wear and tear caused by
normal use and regular handling of the item.
- The label containing the serial number of your model must not be
torn off under any circumstances as it contains information relevant
to the guarantee.
EN
37