Tenda K8W-3TC Guia De Instalacion página 10

Install the Camera
Install the camera to the monitoring location as required.
- The camera needs to be placed within the wireless coverage of the
NVR.
- The distance between the NVR or camera and the wireless router,
induction cooker, microwave oven, and refrigerator should be more
than 1 meter.
- The antennas of the NVR and the camera are placed vertically.
Fix the Camera
The camera supports ceiling and wall mounting.
Tips
(1) Please make sure the ceiling is strong enough to withstand three times the
weight of the camera.
(2) You may need to prepare a hammer drill, a drill bit, a rubber hammer, a
screwdriver, and a ladder for the installation.
Place the template at
the desired location.
Wall mounting
Drill screw holes and int
anchors into them.
1. Drill bit diameter: 6 mm
2. Hole depth: 28-32 mm
8
Fix the camera using the screws.
Ceiling mounting