Tenda K8W-3TC Guia De Instalacion página 12

Basic Configuration
Local management
Startup
Note
Use the included power adapter to power on the NVR. An abnormal power supply
will cause the NVR to work improperly, or even the NVR may be damaged.
Connect the 12 V 2 A power adapter to the power port of the NVR, and
plug the power adapter into the power socket to start up the NVR.
Shutdown
Note
Do not directly cut off the power of the NVR to force a shutdown; otherwise, the
HDD may be damaged, videos may be lost, or even the NVR may be damaged.
After the mouse and monitor are connected to the NVR, you can
perform the following settings on the GUI of the NVR (exit the
Full-Screen interface):
Click in the upper right corner, click Shutdown
OK. When "The Device is Shut Down. Please Cut Off the Power"
appears on the screen, unplug the power adapter of the NVR.
Quick setup
After connecting the mouse and monitor to the NVR, you can perform
quick setup.
Select the language displayed on the GUI and the time zone in
which the NVR locates, and then click OK.
Language
Time Zone
Date
Time
Initial Setup
Engilsh
(UTC+8:00) Beijing, Chongqing, H
2022 - 07 -
11 : 26 :
OK
10
, and then click
Shutdown
21
51