Tenda K8W-3TC Guia De Instalacion página 15

App management
After the cloud service of the NVR is enabled and the cloud status is
Online, you can add and manage the NVR through the TDSEE App.
Download the TDSEE App.
After the mobile phone is connected to the internet successfully,
download and install the TDSEE App onto your mobile phone by
scanning the QR code or by searching for TDSEE in Google Play or
App Store.
QR Code
Ensure that the NVR is powered on and working properly.
Run the TDSEE App and follow the instructions to complete user
registration. Enter the Home page, then tap Add a device or
upper right corner of the home page.
Tips
To ensure that the login password of the NVR can be reset through the TDSEE App,
register with the reserved email address when activating the NVR.
Scan the QR code on the label at the bottom of the NVR or scan the QR
code on the Cloud Service page, then follow the instructions in the App.
After the NVR is added, you can remotely preview real-time videos, play
back the recordings and check alarm messages through the TDSEE App.
Web management
These series of NVRs can be managed on the web UI.
Activate
If the NVR is not activated, you can activate it through the web UI.
When the activation is completed, you need to log in again.
Connect the computer to the switch or router that is connected to
the NVR.
13
TDSEE
in the