Tenda K8W-3TC Guia De Instalacion página 9

Connect the Device
The K8W-3TC kit is taken as an example here.
Place all cameras near the NVR, and use the included power adapter
(12 V 1 A) to power on the cameras.
Use the included power adapter (12 V 2 A) to power on the NVR.
The cameras and the NVR will automatically establish connections
within 2 minutes. When the LED indicator of the cameras turns solid
blue, the NVR successfully adds the cameras and starts recording.
Reset
Camera 1
Internet
LAN
Router
Power outlet
Power outlet
Grounding
terminal
Ethernet cable
7
Reset
Camera 8
NVR
POWER LAN HDMI VGA USB
HDMI or
VGA cable
Monitor