American Standard Aspirations 7061857 Manual Del Propietário página 3

INSTALLATION INSTRUCTIONS
1
INSTALL SPOUT
Turn off hot and cold water supplies
before beginning.
• Insert SPOUT SHANK (1) through RUBBER
WASHER (2) and the deck.
• Assemble NYLON WASHER (3), and MOUNTING
NUT (4) onto SHANK (1) from underside
of sink or mounting surface. Hand tighten
MOUNTING NUT (4).
Note: Deck Hole diameter must be 1-1/4"
minimum.
2
INSTALL HANDLES
• Insert HANDLE SHANK (1) through the deck.
• Assemble WASHER (3) and MOUNTING NUT (2)
onto SHANK (1) from underside of the sink or
mounting surface. hand tighten MOUNTING
NUT (2).
3
INSTALL DRAIN
• Add plumbers putty or silicone to the underside of
LIP (5) and insert DRAIN SHANK (1) through the sink
basin.
• Slide RUBBER GASKET (2) and WASHER (3) on to
DRAIN SHANK (1) from below the sink basin.
• Thread MOUNTING NUT (4) on to DRAIN SHANK (1)
from below the sink basin and hand tighten.
Note: To operate the drain, push down on the top to
toggle it open or closed.
E
1
3
2
5
1
2
3
4
2
1
3
4