Publicidad
Idiomas disponibles
Idiomas disponibles
10
MAKE HOSE CONNECTIONS
• Connect the bottom two HOSES (1) from the control
box to the two T-PIECES (2) by the water supplies.
• Connect the HOSE (3) from the valve
subassembly to the top of the CONTROL
BOX (4).
11
TEST INSTALLED FITTING FOR LEAKS
• Remove AERATOR (1) with supplied aerator key. With
handles in OFF position, turn on water supplies and
check all connections for leaks.
• Operate both handles to flush water lines thoroughly.
• Rotate spout from left to right and check for leaks.
Spout rotates 130 degrees.
• Replace AERATOR (1).
4
1
2
1
3
2
Publicidad
